The quality of the grinding wheel of a glass edge grinder has a great impact on the grinding quality of the glass. Problems with the grinding wheel can easily damage the waterproof cover, causing water leakage, and easily burn out the motor. So how to change the grinding wheel of a glass edge grinder? It’s very simple. Just knock it down slowly and patiently, and then use fine sandpaper to gently grind the shaft and replace it. The following editor will introduce to you some common problems and solutions for glass edge grinders.
1. How to change the grinding wheel of a glass edge grinder
You can only knock it down slowly and patiently, and then use fine sandpaper to gently grind the shaft, and ask the grinding wheel manufacturer to increase the inner hole of the grinding wheel by 1 to 2 threads. Or tap on both sides of the inner hole of the grinding wheel, 2 8 mm threads, and use 2 8 mm screws to push it out when removing the grinding wheel.

2. Common problems and solutions for glass edge grinders
1. The brick edge is not straight
Solution:
(1) Adjust the pressure of the pressure belt and tighten the pressure belt.
(2) Adjust the balance and tightness of the conveyor belt.
(3) Adjust the grinding amount of the two relative grinding heads to make them basically consistent.

2. The diagonal line of the brick edge is out of tolerance
Solution:
(1) Adjust the pusher claw so that its contact line is close to perpendicular to the center of the main machine.
(2) Adjust and tighten the various parts of the brick pushing mechanism.
(3) Adjust the roller position in the centering mechanism so that the contact line of the two rollers is parallel to the center line of the main machine.

3. Ceramic tile edge collapse and broken edges
Solution:
(1) Adjust the grinding amount of the grinding head.
(2) Check the grinding head and the grinding head shaft to eliminate looseness.
(3) Adjust the tightness of the conveyor belt to make the tightness of the two belts tend to be balanced.

4. Brick edge leakage
Solution:
(1) Adjust the brick pushing position of the centering mechanism.
(2) Increase the grinding amount.
(3) Adjust the center line displacement between the relative grinding head and the main machine.

The above is how to change the grinding wheel of the glass edge grinding machine and the common problems and solutions of the glass edge grinding machine. The methods and content are all from the Internet. I hope it can help you!